Focal 5-Kanals slutsteg, 4x120 1x720W RMS 2 ohm

5-CHANNEL AMPLIFIER - 4 X 120 WATTS

5-channel FPX 5.1200 amplifier has a maximum power of 4 x 120 Watt + 1 x 720 Watt at 2 Ohms!
The input selector (2/4/6 channels) duplicates channels, meaning there will always be 5 output channels, even if the head unit only has one or two stereo outputs.
To perfectly tune the subwoofer to the rest of the installation, the bass channel has a low-pass active crossover, a bass equaliser, phase adjustment and a subsonic filter (particularly useful for cutting off frequencies which are too low for a small subwoofer). The remote control enables you to adjust the bass level from the driving seat depending on the type of music you’re listening to.
Stable at 4 and 2 Ohms, this new FPX amplifier will drive most speaker drivers on the market with just the right amount of power: 4 x 75 Watts + 1 x 420 Watts RMS at 4 Ohms (CEA standard). With its power and contained volume, FPX 5.1200 makes the installation easier in order to make the most of your boot space.

• Class D amplifier

• Input selector (2/4/6 channels)

• Stable under 4 and 2 Ohms

• Adjustable active crossover for each pair of channels

• Dimensions: 337 x 175 x 57mm

TECHNICAL SPECIFICATIONS

• Class D amplifier - 5/4/3 channels

• CEA power (4 ohms): 4 x 75Wrms + 1 x 420Wrms

• Power max (2 ohms): 4 x 120Wrms + 1 x 720Wrms

• Power max (channels 1 to 4 bridged at 4 ohms) + channel 5 at 2 ohms: 2 x 240Wrms + 720Wrms

• Bandwidth: 10Hz - 20kHz

• Total harmonic distortion: < 0.03%

• SNR (1W/A): > 75 dB

• High-Pass / Low-Pass filters channels 1 to 4: 50Hz – 500Hz

• Channel 5 (Subwoofer): Subsonic filter (High-pass) 10Hz - 50Hz + Low-pass filter 50Hz - 250Hz

• Channel 5 Bass-Boost: 45Hz / 0 to 12dB

• Phase adjustable from 0 to 180° for channel 5

• Copy mode: (6 CH/4 CH/2 CH)

• Full range mode

• Protection: Short circuit / low impedance / reverse polarity / DC / power drop /heat protection

• Dimensions (L x H x W): 337 x 175 x 57mm

• Weight: 4,1kg